keropleaf.blogg.se - Vortex cleanflight firmware

Ok, there is no music, we’ll leave that to the post-processing, but there are lights, and plenty of action!Ī set of 8 24-bit RGB LEDs sit on the tail of the Vortex, sandwiched safely between the upper, and lower frame plates. Some of the biggest names in FPV Quad Racing have abused countless LiPos tuning the Vortex for peak performance, and have produced some stunning videos in the process. and the Vortex OSD will setup the flight controller for you. Just select the racer, prop size, HD camera choice, etc. The Vortex includes an industry-first, tuning parameters from Pro-Racers right in the box. The flight cam is protected from impacts, and is suspended from a vibration-dampened carbon-fibre plate. An adjustable bracket allows the camera to be tilted to ensure a good forward view during high-speed racing.Īs the icing on the cake, a monster 3A switching regulator allows any HD cam (GoPro included) to be powered from the flight pack, allowing unnecessary camera batteries to be left at home. The flexible Vortex camera mount supports both a flight cam, and an HD camera such as a GoPro, or Mobius. PIDs are adjusted on-screen, in easy-to-use menus, driven directly from the R/C Tx. The integrated flight controller, with 3 axis Gyro, 3 axis Accelerometer, and barometer, is pre-programmed with CleanFlight, and is future-proof, supporting future updates.Ī direct, high-speed interface to the full-graphic OSD, and a USB port on the back of the quad for programming and updates, complete the package. The on-board OSD allows video transmitter channels to be chosen using the R/C transmitter, no more dip-switches to flip, and no more frequency lists to remember.įull compatibility with all ImmersionRC/FatShark, Boscam, Team Black-Sheep, DJI, and ImmersionRC RaceBand channels. All channels fall within the legal US Ham band. ImmersionRC’s exclusive RaceBand allows 8 pilots to fly together, while being 100% legal for US resellers to distribute.

Flight Time: Highly dependent upon battery, and flying styleĭownload the Vortex Getting Started GuideĪn on-board NexWaveRF 5.8GHz video transmitter, with 40 channel support, ensures compatibility with any 5.8Ghz A/V Rx on the market.

Receiver Compatibility: CPPM Input, with S-Bus, and Spektrum™ Satellite converter cables optional.

HD Camera: GoPro Hero, Hero 3/4 (Optional power from onboard BEC), Mobius, Runcam.

Flight Camera: FatShark 700TVL CMOS, (900TVL CCD optional).

Power Requirements: 3s-4s LiPo (typical).

Weight: ~350g without battery, or HD camera.

GoPro (3/4) and Mobius mounting options.

Pro-tuning options, select your favorite pilot!.

Integrated 40 channel NexWaveRF 5.8GHz Video Tx.

Integrated full-graphic OSD, with on-screen control of.

Integrated Flight Controller, pre-loaded with Cleanflight.

Carbon Fiber and custom injected plastic design.

Note: The Vortex we carry now come with the all black immersion motors with the prop adapter integrated to the bell housing as seen in the first two pictures. A FPV video monitor or goggles are required to initially setup the Vortex. Just add a compatible R/C Rx (EzUHF preferred of course), and a battery, and go fly, everything else is included, from the SpiroNET Tx antenna, to the props.

Drive that into a custom, integrated, 5.8GHz video transmitter with a punchy 350mW output power, just right for racing with friends. The ImmersionRC team combined a unique foldable mini-quad frame, and added the stuff that ImmersionRC does well.Īn integrated full-graphic OSD, coupled directly to a flight controller pre-loaded with Cleanflight. Looking for a great deal on a RTF FPV racing quad? Then this is the quad for you!